22 Mil Vinyl Tarp for Thickness-Based Cover Orders
LonaTarp manufactures 22 mil vinyl tarp products for B2B orders where buyers specify the finished cover by thickness rather than ounce weight. A mil is one-thousandth of an inch, so 22 mil is approximately 0.56 mm. This makes the specification useful for buyers comparing flexible PVC cover thickness, but it should not be confused with 22 oz vinyl tarp, which refers to fabric weight per square yard.
For custom 22 mil vinyl tarp orders, LonaTarp confirms the finished size, PVC material structure, surface finish, color, welded edge, grommet layout, corner reinforcement, cutouts, printing, packing, and sample approval before bulk production. Thickness gives one part of the material direction, but the finished tarp still depends on fabrication quality and actual use conditions.
Mil Thickness Is Not the Same as Tarp Strength
A 22 mil vinyl tarp can be suitable for light to medium cover requirements where flexibility, waterproof surface protection, and easier handling are important. However, thickness alone does not prove heavy-duty performance. Base fabric, PVC coating, tensile strength, tear resistance, weld quality, edge reinforcement, and fixing method should all be reviewed before production.
If the cover will be pulled tightly, dragged across rough surfaces, exposed to sharp equipment edges, or installed outdoors for long periods, LonaTarp may recommend reviewing a heavier fabric, reinforced edge design, wear patches, or a different material structure. This helps avoid choosing a tarp only because the mil number looks thick enough.
22 Mil Vinyl Tarp Specification Review
| Specification Area | 22 Mil Vinyl Tarp Direction | What to Confirm |
|---|---|---|
| Thickness | 22 mil, approx. 0.56 mm | Confirm measurement method and thickness tolerance |
| Unit Difference | Mil thickness, not oz fabric weight | Do not compare directly with 22 oz vinyl tarp |
| Material Structure | PVC/vinyl tarp material or coated fabric by order | Confirm base fabric, coating, flexibility, and tear direction |
| Finished Cover Use | Light to medium custom cover direction | Confirm abrasion, pulling force, outdoor exposure, and handling |
| Fabrication | Welded edges, grommets, reinforced corners if required | Confirm drawing, hardware layout, and edge design |
| Order Type | B2B custom finished tarp production | MOQ 30 pieces with sample confirmation |
Suitable Uses for 22 Mil Vinyl Tarps
22 mil vinyl tarps are suitable when the project needs a flexible PVC cover with thickness-based specification, waterproof surface protection, and custom finished size.
- Light equipment covers: flexible covers for machinery, tools, and stored equipment with moderate exposure.
- Warehouse dust and moisture covers: custom covers for pallets, inventory, and indoor storage zones.
- Temporary outdoor covers: short to medium-term rain protection where easy handling matters.
- Distributor cover programs: repeatable finished sizes using a thickness-based vinyl tarp specification.
- OEM protective covers: custom color, label, and packing for branded equipment or product covers.
For heavy abrasion, strong wind tension, industrial frame covers, or long-term outdoor installation, a heavier oz-based vinyl tarp may be more suitable.
Factory Direct Custom Production
LonaTarp produces 22 mil vinyl tarp covers according to drawings or size lists, not retail stock replacement. We support custom size, color, welded hems, reinforced corners, grommets, rope edge, webbing, straps, Velcro, zippers, cutouts, logo printing, label packing, and export cartons according to order requirements.
Sample review should include actual thickness, flexibility, weld appearance, edge strength, grommet spacing, surface quality, folding behavior, and packing condition before bulk production.
FAQs About 22 Mil Vinyl Tarps
Is 20 mil a heavy duty tarp?
20 mil is a thickness measurement, not a fabric weight. It may be suitable for some medium cover uses, but it should not automatically be treated as heavy duty. For B2B orders, confirm base fabric, PVC structure, welding, edge reinforcement, and use conditions before deciding.
What does 22 mil vinyl tarp mean?
22 mil means the vinyl tarp material is approximately 0.022 inch thick, or about 0.56 mm. It describes thickness, not the same thing as 22 oz fabric weight.
Is 22 mil vinyl tarp the same as 22 oz vinyl tarp?
No. 22 mil refers to thickness, while 22 oz refers to fabric weight per square yard. They should not be compared as equal specifications.
What is 22 mil vinyl tarp used for?
It is commonly used for flexible equipment covers, warehouse covers, temporary outdoor covers, distributor cover programs, and OEM protective covers where moderate thickness and easy handling are important.
Can 22 mil vinyl tarps be custom made?
Yes. LonaTarp can produce 22 mil vinyl tarps according to finished size, color, edge design, grommet spacing, printing, label, and packing requirements.
What is the MOQ for custom 22 mil vinyl tarps?
MOQ is 30 pieces for custom finished tarp orders. Samples can be confirmed before bulk production.
