2.8 Functional Additives
Functional additives give PVC coated fabric properties that the base formula does not have on its own. The common ones are flame retardants, anti-mildew and antimicrobial agents, anti-static agents, impact modifiers, smoke suppressants, and slip agents and lubricants.
They share two features. First, small amounts are enough: they are usually added at 0.1–5 PHR, or parts per hundred parts of PVC resin. Second, each works independently: they do not build the mechanical backbone of the PVC, they only add a specific property. More is not better; each additive is balanced against the target standard, the service environment, cost and processing stability. Cold resistance sounds like a functional property, but it is achieved through the plasticizer system, so it is covered in 2.4 rather than here.
| Additive | What It Does | Typical Applications |
|---|---|---|
| Flame Retardants | Make the fabric hard to ignite or self-extinguishing once the flame is removed | Tent and marquee fabric, membrane structures, ventilation duct fabric, mattress fabric, sun shades, truck covers |
| Antimicrobial and Anti-Mildew Agents | Inhibit bacteria and mold on the surface, preventing mildew, odor and material breakdown | Membranes, tent fabric, pool liners, medical mattresses |
| Anti-Static Agents | Prevent static buildup, avoiding dust attraction and static sparks | Mine ventilation ducting, covers for precision instruments |
| Impact Modifiers | Improve impact toughness so the PVC does not crack under force | Applications that need better tear and puncture resistance |
| Smoke Suppressants | Greatly reduce the amount and toxicity of smoke in a fire | Fabrics with fire safety requirements |
| Slip Agents and Lubricants | Reduce friction and prevent sticking during calendering and coating | All production routes |
2.8.1 Flame Retardants
Flame retardants make the fabric hard to ignite or self-extinguishing once the flame is removed, which many safety standards require. Any tarpaulin product that could endanger people in a fire may need them, including covers for enclosed spaces and buildings, and fabrics used indoors or outdoors for wrapping, decoration, screening or partitions. Typical examples are tent and marquee fabric, membrane structures, ventilation duct fabric, mattress fabric, sun shades and truck covers.
Countries and regions have issued many mandatory and voluntary standards for different applications. The end use of the product is the key to choosing the standard, because each scenario points to a different standard and a different flame-retardant formula, which must be balanced against processing difficulty and material cost. The main standards for PVC tarpaulin are listed below, with reference flame-retardant dosages where available.
| Standard | Status | Test Method and Requirement | Scope | Reference FR Dosage (PHR) |
|---|---|---|---|---|
| BB/T 0037-2012 (China) | Recommended (industry standard) | Tests afterflame and afterglow time; requires afterflame ≤ 15 s and afterglow ≤ 10 s | Double-side PVC coated flame-retardant waterproof fabric and tarpaulin | — |
| GB 8624-2012 (China) | Mandatory (national standard) | Classifies the fire performance of materials into A1, A2, B1, B2 and other classes | Fire classification of all building materials | 12–16 |
| NFPA 701 (United States) | Recommended (commonly referenced by codes) | Vertical burn test measuring flame propagation | Curtains, drapes and other hanging fabrics in public spaces; also widely used for tarpaulin | 7–8 |
| ASTM E84 (United States) | Recommended (commonly referenced by codes) | Tunnel test measuring flame spread index (FSI) and smoke-developed index (SDI), classified as Class A, B or C | Surface burning characteristics of building materials installed horizontally | — |
| CPAI-84 (United States) | Recommended (industry specification) | Vertical burn tests on different tent parts such as walls and roof; char length must not exceed 72 mm | Flame-resistant materials for camping tents | — |
| FMVSS 302 (United States) | Mandatory (federal regulation) | Measures horizontal burn rate; must not exceed 102 mm/min | Automotive interior materials | — |
| California Technical Bulletin 117 (United States) | Mandatory (state regulation) | Cigarette smolder test simulating ignition by a cigarette; the material must not ignite | Cover fabrics and fillings of upholstered furniture in California | 0–1 |
| MIL-PRF-20696F (United States) | Mandatory (military specification) | Flame tests referencing Federal Standard 191A or NFPA 701 | US military tarpaulin | — |
| EN 13501-1 (Europe) | Mandatory (harmonized standard) | Classifies products into Euroclasses A1, A2, B, C, D, E and F based on fire performance, smoke production and flaming droplets | Mandatory fire classification of construction products in EU member states | 12–16 |
| DIN 4102-1 (Europe) | Recommended (German standard) | Classifies materials into A1, A2, B1, B2 and other classes; tarpaulin usually needs B1 (flame retardant) or B2 (normally flammable) | A tarpaulin fire standard widely recognized in Germany and across Europe | 7–8 |
| BS 7837 (Europe) | Recommended (British standard) | Assesses the flammability of fabrics for tents and similar textile structures | Marquees, temporary structures and similar textile structures in the UK | — |
| EN 14115 (Europe) | Recommended (European standard) | Specifies fire performance test methods for materials used in tarpaulins, tents and related products | Tarpaulins, tents and related structures | — |
| NF P 92-507, M classes (France and former French territories) | Mandatory (French standard) | Classifies materials from M0 (non-combustible) to M4 (flammable) based on heat release and other indicators; M2 (flame retardant) is usually required | Tarpaulin and other materials used in French buildings and public venues | M2: 8–10 M1 is generally not achievable |
| AS 1530.2 (Australia) | Recommended (national standard) | Tests the flammability of thin sheet or woven materials and calculates a flammability index | Flexible sheet or woven materials | — |
| AS 1530.3 (Australia) | Recommended (national standard) | Measures ignitability, flame spread, heat release and smoke release at the same time | Fire hazard assessment of building materials | — |
| AS 2755.2 (Australia) | Recommended (national standard) | Measures the flame spread time of vertically oriented textile specimens | Textiles and textile products | — |
| ISO 6941 (International) | Recommended (international standard) | Measures flame spread time of vertically oriented textiles exposed to a small flame | Single- or multi-component textiles, such as coated fabrics | — |
| ISO 7617-1 (International) | Recommended (international standard) | Specifies requirements for PVC coated knitted fabrics for indoor upholstered furniture | PVC coated fabrics for indoor upholstery | — |
LonaTarp holds flame-retardant test reports for NFPA 701, DIN 4102 B1 and other national standards; they are listed on our certificates page, and our flame-retardant PVC tarpaulin is formulated to the standard each market requires.
2.8.2 Antimicrobial and Anti-Mildew Agents
These agents inhibit bacteria and mold on the fabric surface, preventing mildew, odor and breakdown of the material. Common types include nano silver, copper ions and carbendazim. They are widely used in damp, mildew-prone applications such as membranes, tent fabric, pool liner materials and medical mattresses. LonaTarp holds anti-mildew test reports.
2.8.3 Anti-Static Agents
Anti-static agents prevent static from building up on the fabric surface, which stops dust attraction and static sparks. They are used in barrier and cover materials for sensitive industries, such as ventilation ducting in underground mines and covers for precision instruments, which are the main uses of our anti-static PVC tarpaulin.
2.8.4 Impact Modifiers
Impact modifiers raise the impact toughness of PVC and stop it from cracking under force. PVC itself has low impact strength, so some tarpaulin applications need extra resistance to tearing and puncture.
| Impact Modifier | Characteristics | Notes |
|---|---|---|
| EVA (ethylene-vinyl acetate) | Good flexibility and cold resistance | A common toughening material |
| Elastomers and Rubbers | Ethylene-propylene rubber (EPR) and nitrile rubber (NBR) significantly improve low-temperature impact resistance | Gives a springy hand feel similar to rubber or silicone products |
| Dedicated Tougheners | Elastic tougheners such as KY-66, made specifically for flexible PVC | Give high elasticity and high gloss |
2.8.5 Smoke Suppressants
Flame retardants fight the fire; smoke suppressants cut the amount and toxicity of the smoke it produces. PVC tarpaulin gives off dense, toxic smoke when it burns, so smoke suppressants are a key part of making it safer. Common types are molybdenum compounds, magnesium hydroxide (MDH), aluminum hydroxide (ATH) and zinc/boron compounds. Their mechanisms, effects and costs differ, and they are sometimes combined for a synergistic effect.
2.8.6 Slip Agents and Lubricants
Slip agents and lubricants reduce the friction coefficient during calendering and knife coating, giving a smooth, non-blocking result. The two processes need different additives:
| Process | Main Need | Common Additives |
|---|---|---|
| Calendering | Anti-blocking and slip on the film | Surface-active agents such as oleamide and erucamide |
| Knife Coating | Good paste flow and release | Internal lubricants such as butyl stearate, and external lubricants such as oligomeric complex esters |
Tell us the standard, the service environment and any special property your product needs, and we will build the additive package into the formula and confirm it on a trial sample.