1.2 mm Swimming Pool Membrane for Custom Pool Liner Rolls
LonaTarp manufactures 1.2 mm swimming pool membrane as PVC pool liner roll material with internal mesh fabric support. This structure helps improve dimensional stability, tear resistance, and material strength during liner fabrication and pool installation, while avoiding the limitations of plain single-layer PVC film.
The 1.2 mm thickness direction is suitable when the order needs pool liner rolls with a practical balance between flexibility, structure, and roll handling. It can be considered for projects that require easier handling, lighter roll weight, or a more cost-controlled liner material direction compared with thicker membrane options.
How the Internal Mesh Fabric Supports the Liner Structure
For swimming pool membrane, thickness is important, but liner performance also depends on the inner support layer, PVC layer quality, lamination or coating adhesion, flexibility, surface texture, and welding behavior. The internal mesh fabric helps the liner keep better shape stability during cutting, welding, installation, and long-term use in pool environments.
Before production, LonaTarp confirms the mesh-supported structure, roll width, PVC layer quality, surface finish, color, pattern direction, and welding route. If the order needs UV resistance, chlorine resistance, mildew resistance, anti-slip texture, or printed design, those requirements should be confirmed before sampling.
Pool Liner Roll Specification Review
| Specification Area | LonaTarp Production Direction | Confirmation Before Bulk Order |
|---|---|---|
| Thickness Direction | 1.2 mm swimming pool membrane | Confirm thickness tolerance and measurement method |
| Supply Form | Custom pool liner rolls | Confirm roll width, roll length, core, packing, and loading method |
| Material Structure | PVC layers with internal mesh fabric support | Confirm mesh type, layer bonding, and dimensional stability |
| Surface Options | Smooth, embossed, printed, or anti-slip direction | Confirm texture, pattern, gloss level, and cleaning requirement |
| Pool Performance | UV, chlorine, mildew resistance options | Confirm test method and pool water condition before production |
| Order Mode | Factory custom production | MOQ 5,000 sqm, sample confirmation available |
Application Directions for 1.2 mm Pool Membrane
1.2 mm swimming pool membrane is suitable for pool liner projects that need fabric-supported PVC structure but prefer easier handling than thicker membrane rolls.
- Above-ground pool liner production: roll material for pool manufacturers and liner fabricators.
- Residential pool lining: membrane for standard pool lining or renovation projects.
- Small to medium pool projects: practical thickness direction when lighter roll handling is required.
- Patterned pool liner supply: printed or embossed surfaces for visible pool interiors.
- Custom liner fabrication: roll material for welding, cutting, and shaping pool liner sections.
Actual suitability should be confirmed according to pool size, installation method, welding route, water treatment condition, surface texture, and local project standard.
What We Check Before Pool Liner Production
For 1.2 mm swimming pool membrane, sample review should focus on thickness consistency, internal mesh fabric support, PVC layer quality, surface texture, color or pattern appearance, flexibility, welding behavior, and roll flatness. If the material will be welded into pool liner sections, welding temperature and seam behavior should be tested before bulk fabrication.
LonaTarp supplies 1.2 mm swimming pool membrane as custom pool liner rolls for pool liner manufacturers, contractors, distributors, and project buyers. Normal production lead time is about 15 days after specification approval, depending on color, pattern, texture, thickness, liner structure, roll size, and packing method.
