23 oz Air-Tight Heavy Duty Vinyl Fabric
Our 23 oz air-tight heavy duty vinyl fabric is a polyester base with a continuous PVC barrier on both sides, at about 23 oz per square yard (approx. 780 gsm). It is built for products that must hold air or seal water under pressure, such as commercial inflatables, air tubes, inflatable shelters and sealed containment covers, where a standard tarp-grade coating is not enough.
23 oz Heavy Duty Vinyl Fabric Specifications
| Specification |
23 oz Air-Tight Grade |
| Weight |
23 oz/yd² (approx. 780 gsm), adjustable to your requirement |
| Base Fabric |
Most common build: 1000D × 1300D woven polyester, 24 × 22 per inch. Fully customizable: 250D–2000D, woven or warp-knitted |
| Coating |
PVC coated on both sides; laminated construction available for the highest air retention |
| Measured Weight |
778 g/m² on this construction |
| Thickness |
0.64 mm (about 25 mil) |
| Tensile Strength (warp / weft) |
3,455 / 3,286 N/5cm |
| Tear Strength (warp / weft) |
616 / 584 N/5cm |
| Peel Adhesion (face / back) |
139 / 137 N/5cm |
| Air-Tightness |
Continuous coating with pinhole inspection; air retention confirmed on welded samples |
| Surface |
Matte or glossy; printing available for commercial inflatables |
| Width |
Up to 3.2 m (126 in) finished width; roll length to order |
| Color & Printing |
Any color matched to a Pantone reference; roller, digital and UV printing available |
| Outdoor Service Life |
About 2 years longer than the figures commonly quoted for PVC coated fabric: 12–22 years outdoors depending on top coat, UV exposure and use |
| Cold Flexibility |
Stays flexible down to -30°C (-22°F) |
| Fire Retardancy |
FR formulation on request; test reports to NFPA 701 and DIN 4102 for tested constructions |
| Joining |
High-frequency, hot-air and hot-wedge welding; sewing |
| Batch Testing |
GSM, width, peel adhesion, tensile, tear and color difference checked every run |
| MOQ & Lead Time |
5,000 m² per order; usually about 15 days after the specification is confirmed |
| Test Values |
Typical values: median of our 2023–2025 production test records for the construction above; each order is tested and reported on its own |
Where 23 oz Air-Tight Vinyl Fabric Is Used
| Application |
Why an Air-Tight Heavy Grade |
| Commercial inflatables and bounce products |
Thick coating resists abrasion and holds air at welded seams |
| Inflatable tubes, frames and shelters |
Barrier layer stays continuous when panels are folded and packed |
| Sealed covers and containment products |
Waterproof under pressure, weldable into closed shapes |
Air-Tight Performance Comes From the Barrier, Not the Weight
Weight alone does not make a fabric air-tight. What matters is coating continuity, adhesion to the base and freedom from pinholes, and how the seams are made. We inspect the coating surface, test peel adhesion on every run and weld sample seams so you can test air retention on your design. For inflatables with the highest air-retention demands, we recommend a laminated build; see
PVC laminated fabric.
Ordering 23 oz Heavy Duty Vinyl Fabric
To quote, send us the end product, how the material will be joined (welding, sewing or both), target weight and base fabric if you have one, width and roll length, color or Pantone reference and surface finish, required functions or test reports, your target market and the order quantity. A current sample from your line lets us match construction and surface exactly. For inflatables, also tell us the working pressure and welding method.
We make a trial sample for your approval, and bulk production follows the approved sample. If you would rather buy finished pieces, we can also cut, weld and finish them in our factory: 30 pieces per size, with the order totaling at least 5,000 m².
For other weights, see our full
PVC coated polyester fabric range.
FAQ
Is 23 oz vinyl fabric air-tight?
Yes. This grade is built with a continuous PVC barrier and checked for pinholes. Air retention in the finished product also depends on seam welding, so we weld test seams on your construction.
Can 23 oz air-tight vinyl be used for inflatable boats?
For marine-grade inflatable boats we usually recommend a laminated air-tight build. Tell us the boat design and we will propose the construction.
How is 23 oz different from your 22 oz vinyl coated polyester?
The
22 oz vinyl coated polyester is built around an anti-bacteria surface; this 23 oz grade is built around air-tightness for inflatable and sealed products.