2. Material Composition

2.1 Base Fabric (Polyester Reinforcement)

The base fabric is the textile core of PVC coated fabric. Also called the scrim or reinforcement fabric, it is made from high-tenacity, low-shrink or ultra-low-shrink polyester filament yarn. In a double-sided construction it sits between two PVC layers; in a single-sided construction it is the polyester backing of the vinyl fabric.

The PVC coating provides waterproofing, weather resistance, color and functional properties. The base fabric provides tensile strength, tear strength and dimensional stability, and it decides how the material behaves when it is tensioned, folded, cut, sewn or welded.

That is why two rolls with the same GSM can perform and cost very differently. Yarn size, fabric density and construction change the strength, hand feel and tear behavior of the finished material, so a fair supplier comparison starts with the base fabric, not the total weight. LonaTarp builds its PVC coated polyester fabric on two base fabrics: woven and biaxial warp-knitted polyester.

2.1.1 How Base Fabric Specifications Are Written

A base fabric specification combines yarn size and fabric density, for example 500D × 500D / 9 × 9 or 1000D × 1000D / 20 × 20. The first pair is the warp and weft yarn size; the second pair is the number of yarns per unit length in each direction.

Term What It Means Example
Denier (D) Mass in grams of 9,000 m of yarn at standard moisture regain. A higher denier means a heavier, usually thicker yarn. 500D, 1000D
Decitex (dtex) Mass in grams of 10,000 m of yarn. 1 D ≈ 1.11 dtex. 1000D ≈ 1,100 dtex
Fabric Density Warp × weft yarn count per inch or per centimeter. 20 × 20 /inch ≈ 8 × 8 /cm

Most buyers quote density per inch; some European buyers use per centimeter. Check the unit before you compare quotes: 9 × 9 per inch and 9 × 9 per centimeter are very different fabrics.

Denier alone does not settle vinyl fabric strength. Yarn tenacity grade, twist and fabric construction all affect the result, which is why a 1000 denier PVC coated polyester from two suppliers can test differently. Inflatable and airtight PVC materials are often specified in dtex rather than denier.

2.1.2 Common Base Fabric Types

LonaTarp produces PVC coated fabric on woven and biaxial warp-knitted polyester. The other substrates below are used elsewhere in the coated textile industry and are listed for reference, so you can identify a sample or spec sheet you already have.

Base Fabric Construction Strengths Limitations Typical Uses
Woven Fabric
(used by LonaTarp)
Warp and weft yarns interlaced at right angles Tight, flat surface; regular appearance; good dimensional stability Slower weaving and higher base fabric cost Premium tarpaulins, tents, architectural membranes, covers with high appearance requirements
Biaxial Warp-Knitted Fabric
(used by LonaTarp)
Straight warp and weft yarns held together by binding yarns Fast production and lower cost; strength at the same denier can approach woven fabric Dimensional stability and surface appearance usually below woven fabric Cost-sensitive large-area covers, general-purpose tarps
Fiberglass Fabric Woven glass fiber yarns Inherently flame resistant, almost no heat shrinkage, edges do not curl Lower tensile and tear strength than polyester Projection screens, sun shades
Nonwoven Fabric Bonded fibers with no warp or weft Soft, bulky and lightweight Poor dimensional stability and tear strength; can only be coated or laminated on one side Mattress fabric, decorative materials
Knitted Fabric Interlocking yarn loops One-way or two-way stretch Low strength; needs dyeing and finishing; short rolls and narrow widths Rainwear, mattresses and other consumer products
Specialty Fabrics Oxford and other specialty weaves Specific looks or functions Narrow use, short rolls and higher cutting waste Special cross-industry projects

2.1.3 Woven vs. Biaxial Warp-Knitted Base Fabric

In a woven fabric, warp and weft yarns pass over and under each other, so every yarn has a slight wave, called crimp. In a biaxial warp-knitted fabric, the load-bearing yarns lie straight and flat at 90° to each other and are tied together by a binding yarn. This is known as a non-crimp structure.

The difference shows up under load. Straight yarns carry load directly along their length. Crimped yarns first straighten out, so a woven fabric stretches slightly before it carries full load. In return, the interlacing locks the yarns in place, which keeps woven PVC fabric flat and stable through coating, cutting and welding.

Comparison Woven Fabric Biaxial Warp-Knitted Fabric
Yarn Path Interlaced and crimped Straight and non-crimp, held by binding yarns
Response to Load Yarns straighten before carrying full load Yarns carry load directly along their length
Surface Flat, regular and uniform Less uniform than woven fabric
Dimensional Stability Good Usually lower than woven fabric
Production Speed Slower Faster, suited to high volumes
Cost Higher Lower
Best Fit Products where appearance and dimensional accuracy matter Large-area covers where price per square meter drives the order

Neither construction is better across the board. Choose PVC coated polyester woven fabric for appearance-critical, dimensionally demanding products such as welded tent panels and side curtains. Choose PVC coated warp-knitted fabric when cost per square meter matters most. The same denier does not guarantee the same strength across the two constructions, so we confirm warp and weft tensile and tear values on the finished fabric before bulk production.

2.1.4 Base Fabric Treatments

Most PVC coated fabric uses undyed white polyester base fabric. The treatments below are added when the end use calls for them.

Treatment What It Does When to Ask for It
Yarn-Dyed Base Fabric Yarn is dyed before weaving, so cut edges and needle holes show color instead of white Black PVC coated fabric for bags and luggage; dark products with visible seams
Anti-Wicking Stops water from traveling along the yarns by capillary action Truck covers, outdoor covers and containment products with exposed cut edges
Flame-Retardant Yarn FR polyester yarn combined with a flame-retardant PVC compound Tents, curtains and covers that must meet a fire standard
Twisting Packs filaments tightly together, improving resistance to shear and tear Constructions where tear strength matters
Stabilization A light acrylic binder locks the yarn crossovers Low-density woven fabrics and wide widths

Anti-wicking. Anti-wicking yarn exists but is expensive. We get the same effect through impregnation: the base fabric passes through PVC paste, which fills the gaps between filaments and cures in place, so water cannot wick in from a cut edge. Any LonaTarp PVC fabric can be produced this way.

Flame retardancy. Polyester filament burns on its own, so flame-retardant performance comes from the full construction: FR yarn plus a flame-retardant PVC formulation. FR yarn alone does not make a fabric compliant; compliance belongs to the tested construction. LonaTarp holds test reports for fire retardant vinyl fabric constructions to NFPA 701 and DIN 4102 B1, among other standards; the reports are listed on our certificates page, and our flame-retardant PVC tarpaulin page covers the fire standards we work with.

Twisting. The woven base fabrics we use typically carry 60–120 twists per meter. A twisted yarn looks finer than an untwisted yarn of the same denier, so do not judge denier by eye; ask for the yarn specification.

Stabilization. Before winding, a low-density woven fabric can be sprayed with about 3–5 g/m² of acrylic binder. It keeps the warp and weft from shifting during coating, and the cut edges of the finished fabric do not fray, so seams look clean. Constructions that may need it include 1000D × 1000D / 12 × 12 and 250D × 250D / 24 × 24 above 1.8 m width, as well as 1000D × 1000D / 8 × 8 and 500D × 500D / 18 × 17.

2.1.5 Common Base Fabric Defects

Defects in the base fabric carry straight through to the coated roll. These are the ones that matter most to converters:

Defect What It Looks Like Effect on the Finished Fabric
Missing Picks Weft yarns, or inserted weft in warp-knitted fabric, missing in a local area Local weak spot and uneven density
Oily Yarn Dark or black marks from machine oil Visible stains; can weaken coating adhesion
Knots Yarn joints standing out from the surface Bumps on the coated surface
Broken Filaments Loose filaments or fuzz on the surface Uneven coating and rough surface
Double Ends Two yarns running where one should Thick streaks and uneven structure
Skew / Distortion Weft no longer square to the warp Panels cut out of square
Yarn Slippage Yarns shifted out of position Open or dense patches
Tight Ends Yarns under higher tension than their neighbors Streaks and poor flatness

For fabricators who cut, sew, print or use hot-air or high-frequency welding, base fabric uniformity matters as much as surface color. Every production run of LonaTarp PVC coated fabric is tested for GSM, width, peel adhesion, tensile and tear strength, and color difference.

2.1.6 Base Fabric Width vs. Finished Roll Width

Does vinyl fabric shrink? The polyester base fabric does: it contracts when heated on the coating line. To reach the target width, the base fabric is made 15–20 cm wider than the finished roll, and the edges are trimmed after coating.

LonaTarp PVC coated fabric is available up to 3.2 m finished width. When you order, specify the usable finished width and its tolerance, not the width of the uncoated base fabric.

For large tents, truck side curtains and architectural membranes, roll width decides how many welded seams a panel needs and how much fabric is cut away, which is why roll width directly affects custom tarp cost.

2.1.7 What to Specify When You Request a Quote

GSM alone does not define a PVC coated fabric. Two 650 g/m² fabrics can use different yarns, densities and coating ratios and behave very differently in use. Include these points in your inquiry:

Parameter What to Specify
Base Fabric Construction Woven or biaxial warp-knitted
Yarn Size For example 500D or 1000D (or the dtex value)
Fabric Density For example 9 × 9 or 20 × 20, and whether it is per inch or per centimeter
Finished Weight Total GSM of the coated fabric
Treatments Anti-wicking, flame-retardant yarn, yarn-dyed base fabric, stabilization
Finished Width Usable width (up to 3.2 m) and tolerance
Mechanical Properties Warp and weft tensile and tear targets, with the test method
Processing Cutting, sewing, hot-air welding, high-frequency welding or printing

If you already use a material, send us a sample or its spec sheet. We will match the base fabric and PVC coating, make a trial sample for your approval, and run bulk production to the approved sample. Bulk orders start at 5,000 m². Send us your specification for a quote.