16 oz PVDF Coated Polyester Fabric in Matte Blue
Our 16 oz PVC-coated polyester fabric is a polyester base coated with PVC on both sides, at about 16 oz per square yard (approx. 540 gsm), finished with a PVDF top coat and matte blue on both faces. It is lighter and easier to handle than 18 oz or 22 oz material, with a low-glare, easy-clean surface for visible panels, covers and mats.
16 oz Vinyl Fabric Specifications
| Specification |
16 oz PVDF Matte Blue Grade |
| Weight |
16 oz/yd² (approx. 540 gsm), adjustable to your requirement |
| Base Fabric |
Most common build: 840D woven polyester, 18 × 18 per inch. Fully customizable: 250D–2000D, woven or warp-knitted |
| Coating |
PVC coated on both sides |
| Measured Weight |
550 g/m² on this construction |
| Thickness |
0.45 mm (about 18 mil) |
| Tensile Strength (warp / weft) |
2,259 / 1,971 N/5cm |
| Tear Strength (warp / weft) |
499 / 365 N/5cm |
| Peel Adhesion (face / back) |
85 / 92 N/5cm |
| Top Coat |
PVDF surface treatment, applied in-house |
| Surface & Color |
Matte blue on both sides; other colors matched to a Pantone reference |
| Width |
Up to 3.2 m (126 in) finished width; roll length to order |
| Color & Printing |
Any color matched to a Pantone reference; roller, digital and UV printing available |
| Cold Flexibility |
Stays flexible down to -30°C (-22°F) |
| Fire Retardancy |
FR formulation on request; test reports to NFPA 701 and DIN 4102 for tested constructions |
| Joining |
High-frequency, hot-air and hot-wedge welding; sewing |
| Batch Testing |
GSM, width, peel adhesion, tensile, tear and color difference checked every run |
| MOQ & Lead Time |
5,000 m² per order; usually about 15 days after the specification is confirmed |
| Test Values |
Typical values: median of our 2023–2025 production test records for the construction above; each order is tested and reported on its own |
Where 16 oz Vinyl Fabric Is Used
| Application |
Why This Grade Fits |
| Gym, exercise and martial arts mat covers |
Easier to sew and wrap than 18–22 oz; PVDF surface wipes clean |
| Partitions and divider curtains |
Matte surface reduces glare; same color on both faces |
| Outdoor equipment and gear covers |
PVDF top coat resists dirt pick-up and weathering |
| Fabricated panels and wall pads |
Medium weight holds shape without excess bulk |
Why Choose a PVDF Top Coat?
PVDF is applied over the PVC as a protective surface layer. Compared with a plain PVC surface, it resists dirt pick-up, makes cleaning easier and improves weathering, which matters for products that stay visible or outdoors. We apply PVDF and other top coats in-house, so coating and base fabric are controlled on one production line.
PVDF-coated fabric is harder to weld than standard PVC, but it can still be welded. We adjust welding temperature and speed for the selected construction and weld test pieces on our high-frequency, hot-air and hot-wedge equipment before bulk approval.
16 oz vs 18 oz and 22 oz
| Grade |
Choose It When |
| 16 oz (this grade) |
You want a clean, durable surface and easier handling for mats, partitions and covers |
| 18 oz vinyl coated polyester |
The product is a tarp, truck cover or curtain that takes daily abrasion |
| 22 oz vinyl coated polyester |
You need a heavier, stiffer fabric with an anti-bacteria surface |
Ordering 16 oz PVC-Coated Polyester Fabric
To quote, send us the end product, how the material will be joined (welding, sewing or both), target weight and base fabric if you have one, width and roll length, color or Pantone reference and surface finish, required functions or test reports, your target market and the order quantity. A current sample from your line lets us match construction and surface exactly.
We check color, gloss and coating uniformity on a full-width sample, not just a small swatch, and bulk production follows the approved sample. If you would rather buy finished pieces, we can also cut, weld and finish them in our factory: 30 pieces per size, with the order totaling at least 5,000 m².
For other weights, see our full
PVC coated polyester fabric range.
FAQ
Is 16 oz vinyl fabric good for gym mat covers?
Yes. It is flexible enough to wrap foam and sew corners, and the PVDF surface is easy to wipe down. For an anti-bacteria surface, ask us about our tested formulations.
Can I get 16 oz PVDF fabric in colors other than blue?
Yes. Matte blue is this grade's standard; any color can be matched to a Pantone reference on a 5,000 m² order.
Is PVDF-coated vinyl fabric weldable?
Yes, with adjusted temperature and speed. We weld test pieces on your construction before you approve bulk production.