2.2 PVC Coating
The PVC coating is the functional layer of PVC coated fabric. The base fabric carries the load; the coating keeps water out and decides how the material looks, feels and ages. It is a compound of PVC resin, plasticizer, filler, stabilizer, pigment and functional additives. The balance between them sets softness, weather and UV resistance, flame retardancy, mildew resistance, cold flexibility, regulatory compliance, anti-static performance, color stability and weldability.
That is why two fabrics built on the same base fabric can behave very differently: one stays flexible in winter while the other cracks, one welds cleanly while the other needs a narrow process window. When you specify a PVC coating for fabric, the formula matters as much as the coating weight. LonaTarp develops its own formulations and adjusts them to the end use of each order of PVC coated fabric.
2.2.1 What the PVC Coating Is Made Of
A PVC coating compound has seven groups of ingredients. Sections 2.3 to 2.9 cover each one in detail.
| Ingredient | Role in the Coating | What It Affects |
|---|---|---|
| PVC Resin | The base polymer that forms the coating | Coating strength, processing behavior, and whether the compound is made into film or paste |
| Plasticizer | Turns rigid PVC into a soft, flexible material | Hand feel, cold flexibility, plasticizer migration and regulatory compliance |
| Filler | Mineral powder that adds body and lowers compound cost | Weight, stiffness and cost; too much filler reduces flexibility and durability |
| Stabilizer | Protects PVC from heat during processing and from light in use | Processing window, long-term color and aging |
| Pigment | Gives the coating its color and opacity | Color matching, fade resistance and light blocking |
| Functional Additives | Flame retardants, UV absorbers, antimicrobial agents, anti-static agents, smoke suppressants and slip agents | Fire performance, outdoor life, mildew resistance, static control and roll handling |
| Surface Treatment | A thin acrylic or PVDF top coat applied after coating or lamination | Dirt pickup, UV resistance, plasticizer migration and weldability |
2.2.2 Matching the Coating Formula to Your Application
Most performance requirements are met in the compound, not by adding weight. Tell us how the product will be used, and we adjust the formula. Typical adjustments:
| Requirement | What We Adjust | Notes |
|---|---|---|
| Outdoor Exposure and Fading | UV absorbers, stabilizers and pigment selection; optional acrylic or PVDF top coat | Unprotected PVC fades and chalks in sunlight; the UV package in our UV-resistant PVC tarpaulin slows this down. |
| Low Temperatures | Plasticizer type and level; cold-crack additives | For winter transport, cold storage and high-latitude use. Tell us the lowest service temperature. |
| Fire Standards | Flame retardants in the coating, combined with flame-retardant yarn | Compliance belongs to the tested construction, as with our flame-retardant PVC tarpaulin. |
| Mildew and Damp Storage | Antimicrobial additives; an acrylic top coat also helps inhibit mildew | For tents, awnings and covers that are folded or stored damp. We hold mildew-resistance test reports. |
| Static Control | Anti-static agents in the compound | For ventilation ducting in underground mines and covers for precision instruments. |
| Market Regulations | Plasticizer and additive selection, including non-phthalate plasticizers such as DOTP | We have a stable supply of DOTP and other eco-friendly plasticizers, with test reports. Tell us your market and the restricted-substance list you need to meet, such as the REACH SVHC Candidate List or phthalate limits. |
| Welding | Resin and plasticizer balance; top coat selection | Acrylic and PVDF top coats make welding harder but not impossible; adjusting welding temperature and speed solves it. |
| Color | Pigment formula matched to your sample or color reference | Every production run is checked for color difference. |
PVC coated fabric is weldable by high-frequency, hot-air and hot-wedge welding, so seams can be sealed watertight without stitch holes. Hot-air and high-frequency welding are the two most common methods in fabrication shops.
2.2.3 Calendered Film or PVC Paste
The vinyl coating reaches the fabric in one of two forms, and the form decides the production process.
| Form | How It Is Made | Production Processes |
|---|---|---|
| Calendered PVC Film | Resin and additives are mixed, plasticized and rolled into film on a calender | Cold lamination, hot lamination, pre-coated film lamination |
| PVC Paste (Plastisol) | Paste resin, plasticizer, additives and pigment are mixed into a liquid paste | Knife coating, impregnation, and the bonding layer in pre-coated film lamination |
Film-based material is usually sold as PVC laminated fabric; paste applied with a knife coater produces knife-coated PVC fabric. LonaTarp calenders its own PVC film in-house and runs knife coating, cold lamination, hot lamination, pre-coated film lamination and impregnation, so the same base fabric can be finished by whichever route suits the end use, whether that is knife coating or lamination.
2.2.4 Coating Weight and Thickness
The total GSM of a PVC coated fabric is the base fabric weight plus the coating on both sides. On the same base fabric, more coating gives better waterproofing and abrasion resistance, more material to weld into and a smoother surface. It also adds weight, thickness and stiffness, so the coating weight is set by the end use rather than pushed as high as possible.
Vinyl fabric thickness depends on the coating weight, the base fabric and any embossed texture, so GSM is the main commercial specification and thickness is quoted alongside it. In a single-sided construction, only one face is coated and the back stays as textile. This keeps the material lighter, more flexible and softer on the fabric side, and it is used for specific products such as washable incontinence pads, sports mats, removable mattress covers and other household goods.
2.2.5 What to Tell Us About the Coating
Coating requirements are easiest to meet when they are defined before sampling. Include these points in your inquiry:
| Parameter | What to Tell Us |
|---|---|
| End Use | The finished product and where it will be used, such as truck covers, tents, curtains or inflatables |
| Service Temperature | The lowest and highest temperature the material will see in use |
| Outdoor Exposure | Climate and how long the product stays outdoors |
| Fire Standard | The standard your market requires, such as NFPA 701 or DIN 4102 B1 |
| Regulations | Target market and any restricted-substance test list |
| Color and Finish | Color sample or reference; glossy, matte, embossed or lacquered surface |
| Processing | High-frequency, hot-air or hot-wedge welding, sewing or printing |
| Coating Sides | Double-sided or single-sided coating |
If you already use a material, send us a sample. We will match the coating formula and base fabric, make a trial sample for your approval and run bulk production to the approved sample. Send us your requirements to start sampling.