What Is 1.2 mm Pool Liner Material?
LonaTarp manufactures 1.2 mm pool liner material as a PVC-based vinyl pool liner material supplied in rolls. It is designed for pool lining projects that need a flexible waterproof layer with internal mesh fabric support, rather than plain PVC film. The internal fabric layer helps the liner maintain better shape stability during cutting, welding, installation, and pool use.
The 1.2 mm thickness gives the material a lighter and more workable structure than thicker pool membranes. It can be easier to roll, transport, cut, and weld, making it a practical option for manufacturers and contractors who need pool liner material that balances handling efficiency, surface appearance, and liner strength.
Where Is This Material Usually Used?
1.2 mm vinyl pool liner material is suitable for pool projects where flexibility, weldability, and easier installation are important. It can be used for above-ground pool liner production, residential pool renovation, smaller in-ground pool projects, custom liner fabrication, and pool liner replacement where a lighter reinforced structure is preferred.
For commercial pools, water parks, or high-traffic facilities, the final suitability should be confirmed according to pool size, water treatment condition, installation method, and required service life. In some projects, a thicker 1.5 mm or 2.0 mm membrane may be more appropriate, especially when the liner needs stronger body, heavier surface texture, or higher durability.
What Makes It Different from Plain PVC Film?
Plain PVC film is mainly a flexible sheet, while LonaTarp’s pool liner material is produced with PVC layers and internal mesh fabric support. This structure improves dimensional stability and helps reduce stretching, tearing, or shape distortion during fabrication and installation.
For B2B buyers, this difference matters because pool liner material is usually welded into larger sections before installation. The fabric-supported structure helps the membrane behave more consistently during cutting, welding, folding, packing, and pool fitting.
Suitable Use Directions and Limits
| Use Direction | Suitable for 1.2 mm Pool Liner Material | What to Confirm |
|---|---|---|
| Above-ground pools | Yes, especially for flexible liner production | Pool size, welding method, surface texture, and roll width |
| Residential pool renovation | Suitable for many standard liner replacement projects | Installation method, water treatment, and surface requirement |
| Small to medium in-ground pools | Can be considered when easier handling is needed | Pool shape, seam layout, and required durability |
| Commercial pool projects | Project-dependent | Confirm whether 1.5 mm or thicker material is required |
| Printed or decorative liner | Suitable with custom pattern options | Pattern repeat, color stability, welding alignment |
| Anti-slip or textured surface | Available by specification direction | Confirm embossing depth, cleaning, and walking area needs |
What We Confirm Before Production
Before producing 1.2 mm pool liner material, LonaTarp confirms thickness tolerance, roll width, internal mesh fabric, PVC layer quality, surface texture, color or printed pattern, flexibility, welding behavior, and packing method. If the order requires UV resistance, chlorine resistance, mildew resistance, anti-slip texture, or special printed design, these should be confirmed before sampling.
Sample review should include actual thickness, surface feel, color appearance, mesh-supported structure, welding response, roll flatness, and how the material behaves after cutting or folding. This helps the order match the intended pool liner production and installation requirements.
Custom Vinyl Pool Liner Material Supply
LonaTarp supplies 1.2 mm vinyl pool liner material as custom roll goods for pool liner manufacturers, contractors, distributors, and project buyers. We support custom roll width, roll length, color, printed pattern, embossed texture, internal mesh structure, UV resistance direction, chlorine resistance direction, mildew resistance option, and export packing.
Roll material MOQ is 5,000 sqm for custom production. Normal production lead time is about 15 days after specification approval, depending on color, pattern, texture, thickness, liner structure, roll size, and order quantity.
